The principle of operation of a penis enlargement pump

Many men are dissatisfied with the parameters of their sexual organ and do not want to tolerate it.Therefore, several techniques are used to help make the penis thicker and longer.A device such as a penis enlargement pump is also widely used.

Device working principle

A pump is a cylindrical shaped device.The device is designed to increase the length and width of a man's penis, as well as to increase erection.

The pump works on a simple principle.When used, pressure is created around the male penis, which helps increase blood flow and fill the corpora cavernosa with blood.The same thing happens with an erection.The penis becomes hard and swells very quickly, which makes it possible to increase its parameters.

Types of pumps and pumping

A penis enlargement pump, regardless of the type, has a single structural principle.It is a transparent bottle measuring centimeters.There are also devices with which a vacuum is created and the required pressure is maintained.

There are three types of pumps:

1. Manual.The vacuum is created using a piston or bulb.These devices have a lower cost, which is why they are often used.However, men have to wait a long time for the effect of its use.
2. Automatic.With this type of pump, the pressure in the bottle is generated by an electric pump, which is already built into the device.Requires batteries to operate.Automatic devices are more preferable as they are highly efficient and allow you to control pressure and suction power.
3. Aquatic.The newest type of pump.The difference is that water is used instead of air.This type of enlarger is safer, more effective, has few contraindications and lasts much longer than previous models.

Pumping is carried out in two ways.The first is called packaging.Its essence is to stretch the tunic and increase the length of the penis, but not the width.To do this, use a narrow jar in which the penis does not swell to the sides, but stretches upward.

During exercises, safety precautions must be observed.

The second method is classic pumping.In this case, a wide bottle is used, in which the penis has the ability to swell in all directions.This makes it possible to increase the width and length of the organ.

Selection criteria

The enlarger pump is selected taking into account the size of the penis and the purpose of its use.Experts advise the following:

1. The length of the device should be approximately 3 cm longer.
2. The width should be 2 cm greater than the diameter of the penis.
3. For beginners, it is recommended to choose the manual type of device, as it is the simplest.

The above penis sizes are taken into account only in a state of arousal.

During the purchasing process, you should also pay attention to the materials from which the enlarger is made.The bottle must be strong enough to prevent accidental damage to the male organ.

Contraindications

Men suffering from the following pathologies are not allowed to use a vacuum enlarger:

1. Thrombosis.
2. Fibrosis.
3. Liver diseases.
4. Kidney diseases.
5. Diabetes mellitus.
6. Pathologies of the heart and blood vessels.
7. Sexually transmitted diseases.
8. Malfunction of the urinary organs.

If a man is not sure whether he can use a pump to increase the length and width of his penis, it is worth seeing a doctor for an examination.

Pros and cons

A vacuum pump allows men to not only make their dignity longer and wider.The device also helps improve erectile function and prolong sexual intercourse by reducing organ sensitivity.Furthermore, the device allows you to adjust the shape of the penis, even if there is curvature.

The negative aspects of the pump only appear when it is used incorrectly.Failure to follow instructions leads to many unpleasant consequences.

Effect of use

If you use the pump constantly, after 6 months your penis will change size forever.To achieve maximum effect, it is recommended to simultaneously take medications that increase the production of sex hormones in men.But this can only be done after consulting a doctor.

It is worth knowing that a pump and a penis enlargement pump are the same thing.

Those who have already tried the pump note that they achieved the desired result.After six months, the length of the penis increases by 3 cm and the thickness by 2 cm.

Instructions for use

To use a vacuum pump to enlarge your penis, you do not need any special skills.Before the procedure, the device must be treated with lubricant to ensure sliding.

The male penis needs to be lubricated with a special cream, the effect of which allows you to normalize blood flow and increase blood flow to the penis.

Then place the penis in the cylinder.Remove air from the bottle to create a vacuum environment.As soon as redness occurs on the skin, wait 30 seconds and start airing.The procedure should not last more than 15 to 20 minutes.

Possible consequences

It is not for nothing that special instructions for using the pump were created.Carrying out all manipulations strictly in accordance with it allows you to avoid adverse consequences.But sometimes men ignore the rules.

As a result, instead of the desired centimeters, the following is obtained:

1. The appearance of a swollen ring at the base of the head of the penis.This occurs due to stagnation of lymphatic fluid.This phenomenon may occur even if the vacuum device is used correctly.If this side effect occurs, you should stop using the device.
2. Swelling of the penis due to the influx of large amounts of lymph.
3. Deterioration of erectile function.
4. Redness of the penis, bleeding.
5. Thrombosis.The disease poses a huge threat to human life, but is extremely rare when using a bomb.

To avoid negative consequences, it is important not only to use the pump correctly.It is also necessary not to ignore the presence of contraindications to its use.If they are, you should look for other ways to enlarge your penis.

Homemade devices

For men who do not want to spend money on purchasing a factory enlarger, there is an opportunity to make one at home with their own hands.

From a cuff pump

To create an airless environment, you need to unwind the pump from the clamp and turn it over.Then you need to reassemble the device, but in reverse order.

Next, you need to make a valve designed to release excess air.To do this, you can use a valve from an aquarium compressor.It must be connected to the application hose and sealed.

From the compressor

You can remove a compressor from unnecessary refrigeration equipment.After removing the evaporator and condenser, cut the tubes that connect them.After that, connect the compressor to the network.

The pump helps, but a greater effect is achieved by taking testosterone-containing medications or using an extender at the same time as using the pump.

Buy an air filter at any auto store.It needs to be fixed to the compressor opening.The filter must be connected to a rubber hose of the required size.Next, all that remains is to test the device’s operation.

Using a syringe

Take a plastic tube, cut three parts, the size of each should be 10 cm.Attach them to the tee.The result is a tee with three branches.

Connect the syringe nozzle to the central tap.Install valves on the side outlets made.

In this case, it is important that one opens upwards and the other inwards.To avoid confusion in the future, you should draw arrows that will indicate the direction of the air.

Using plastic bottles

A fairly simple penis enlargement pump can be created from ordinary plastic bottles.It is important to choose different container sizes.The largest requires cutting off the top to create a cylinder shape.

Punch holes in the bottom of the second bottle and insert it into the first container.It is important that a large gap does not form between the walls.Then you need to connect a hose to a large container.You can take it out of the bicycle tire pump.

Caring for the device

To maximize the life of your enlarger, you must care for it properly.If the device has just been purchased and has not yet been used, it is necessary to wash it well with soap, then dry it and treat it with any antiseptic.Furthermore, the device must be washed after each use.

Do not treat the pump with hydrogen peroxide or boiling water, or use lubricants containing fats during the procedure.Otherwise, there is a high risk of damage.

Who and when was vacuum erective therapy proposed and what is its meaning?

The idea of vacuum erector therapy was introduced into the practice of modern andrology by the American citizen G. Osbon, who in the early 1960s used the first vacuum erector for his own needs.Osbon himself suffered from erectile dysfunction (ED), and at the time it was believed that ED was primarily psychogenic in origin.However, psychotherapy, of course, did not help Mr. Osbon, because he suffered from organic ED.Realizing that the erection of the penis occurs due to the flow of blood into it, the talented inventor suggested that if the penis is placed in a cylinder with a pressure below atmospheric, blood will begin to flow into it under the influence of a vacuum, which should lead to an erection.This is how the first vacuum assembler was created, consisting of an interconnected cylinder and pump.In the first half of the 1970s, serial production of vacuum assemblers designed by G. Osbon began.In addition to the device itself, this American inventor also created a method to overcome it, which was later called the Osbon technique.The meaning of vacuum erection therapy or Osbon technique is to obtain an erection from the penis placed in a vacuum cylinder as well as maintaining the resulting erection by means of compression rings.

• 90% efficiency;
• There is no need to use medications that have side effects;
• Non-aggressive treatment method;
• It helps to create an erection by maintaining all precautions.

Sex shops often advertise and sell vacuum pumps to increase potency.How effective are they?

First of all, you should know that around the world, medical vacuum fitters (approved for medical use) that actually work are only distributed by doctors, medical institutions or pharmacies.This is due to the fact that only a medical professional specially trained in the field of vacuum therapy in andrology can teach the effective and safe use of a vacuum erector.Secondly, sex shops are always interested in purchasing cheaper systems, mainly manufactured in China and other Asian countries, to make more profit from sales.These systems are inexpensive for the following reasons:

• Cheap materials and poor quality manufacturing and assembly.
• Low power pump, which is not capable of creating and maintaining a sufficiently low pressure in the cylinder necessary to ensure adequate blood flow to the penis and the occurrence of an erection.Sometimes, instead of a pump, an ordinary rubber bulb is simply connected to a small primitive cylinder, which is not capable of creating any vacuum.
• Imperfect design and poor quality compression rings.
• Short shelf life.

Naturally, no one in a sex shop is able to provide you with complete and truthful information about all the features of using a vacuum fitter, because... This requires special education.Therefore, buying a “sex shop” vacuum fitter will probably just be a waste of money for you.

How is a Vacuum Erector Used for ED for Vacuum Erection Therapy Using the Osbon Method?

First of all, it must be understood that a vacuum erector, like all other conservative methods of treating ED or male impotence, does not cure it completely, but only provides the opportunity to obtain and maintain an erection necessary for sexual intercourse.

The vacuum assembler kit always includes a vacuum pump, a vacuum cylinder, compression rings and a water-soluble personal lubricant, instructions and/or a video tape on how to use the device.Sometimes the kit is supplemented with a device for placing compression rings on the cylinder and some other devices.Using an erector aspirator to obtain and maintain an erection followed by sexual intercourse includes several steps:

Step 1. The compression ring is pre-installed on the lubricated edge of the vacuum cylinder.The penis is also lubricated and placed inside the cylinder.Using a pump, a vacuum is created in the cylinder.It is important that air is not drawn in between the edge of the cylinder and the skin.To do this, the cylinder must be pressed firmly against the body and a lubricant applied to the edge of the cylinder helps seal the contact.Sometimes you should shave the skin around the penis.If necessary, the vacuum depth is adjusted with the pressure release button on the pump.Lubricating the penis with lubricant helps it slide better inside the cylinder when it starts to tense up.

Stage 2. Under the influence of vacuum, the penis fills with blood and becomes erect.When working with a vacuum pump, you must achieve the maximum possible tension on the penis.A sign that the erection has reached its maximum is heaviness and moderate pain in the head of the penis.It must be understood that the erection obtained with the help of a vacuum erector cannot be as complete as your own erection that you had before the development of ED.

Stage 3. The compression ring is released from the cylinder at the base of the penis, which is held by this ring in an erect state.The patient can have sexual intercourse.The compression ring can remain on the penis for up to 30 minutes.

Stage 4. After sexual intercourse, the compression ring is removed and the penis returns to a calm state.

When using a vacuum erector, you should keep in mind that keeping a compression ring on the penis for more than 30 minutes can lead to circulatory problems and can cause problems such as swelling and even necrosis of penile tissue, decreased sensitivity of the glans penis, progression of scarring changes in the corpora cavernosa of the penis, and worsening of ED.Under no circumstances should you fall asleep after intercourse with the compression ring not removed from the penis.

For greater convenience in using the vacuum erector and to facilitate sexual intercourse, you should use the water-soluble lubricant that comes with the device.The size of the compression ring is selected individually depending on the diameter of the penis.It is possible to place 2 compression rings at the same time.

For what other purposes can a vacuum erector be used in andrology?

Obviously, the main area of application of a vacuum erector in andrology is its use to obtain an erection and perform sexual intercourse.This area of application will be of interest to men who cannot achieve independent erections or who suffer from ED.However, there are several other areas where a vacuum erector can be used by both healthy men and patients suffering from various diseases of the penis.

1. Vacuum massage.In our country, this area of using a vacuum erector is called local negative pressure therapy or LNP therapy.Its idea is that periodic suction of the penis leads to stretching of the cavernous tissue, improves its blood supply, increases its elasticity and eliminates mild forms of organic ED, in addition to preventing erectile dysfunction.Unfortunately, there are currently not a sufficient number of scientific works that statistically correctly confirm the correctness of this idea.However, we consider this area of application of a vacuum erector to be justified and recommend our patients to use a vacuum erector both to prevent ED and to improve the quality of their own erections.Sometimes LOD therapy is used in the complex treatment of organic ED along with erection pills and intracavernous pharmacotherapy.
2. Penis enlargement.According to some researchers, vacuuming the penis, stretching the corpora cavernosa, helps to increase the length and width of the penis.As in the case of vacuum massage, not all researchers share the opinion about the advisability of using a vacuum erector to enlarge the penis.There is no generally accepted method for using a vacuum assembler for this purpose.However, it is known that vacuum erectile therapy has proven to be an auxiliary method of penis enlargement, which is used in combination with surgical enlargement.
3. Straightening the penis.For congenital (intracavernous cord) or acquired (Peyronie's disease) curvatures of the penis, when its deviation from the horizontal axis does not exceed 45°, according to some researchers, it is possible to effectively use a vacuum erector to straighten the penis.
4. Overcoming premature ejaculation.In the presence of premature ejaculation, the penis can be kept erect with the help of compression rings, which are included in the vacuum erector kit and are placed at the base of the penis after erection occurs.
5. Complementary erection.A vacuum erector can be used to “complement” the erection itself if it is not strong enough or to achieve better swelling of the head of the penis in patients who have undergone penile prosthesis.
6. Sexual rehabilitation program after radical prostatectomy and other radical operations for malignant tumors of the pelvic organs.

In recent years, due to improvements in the quality of prostate cancer diagnosis, this disease is increasingly detected at an early stage, when it can most likely be completely cured with surgery - radical prostatectomy.The disadvantage of this operation is that 20 to 100% of those operated on, depending on the technique used to perform the operation and the surgeon's experience, develop erectile dysfunction.If in the first few months after surgery the patient is included in an erectile function rehabilitation program, the chance of restoring one's own erection increases significantly.This program, of which the use of a vacuum assembler is an integral part, is described in detail on our website in the prevention of urological diseases section.

What does a penis look like after a vacuum pump?

Side effects:

• There is not enough hardness at the base of the penis;
• Red and purple spots appear on the skin;
• Uncomfortable feeling of erection;
• The skin color darkens, becomes dry and dull;
• Decrease in erection for a short time;
• Pain from a bruise on the penis.

Fastening concept

Clamping is a method by which men can increase the thickness of their penis.This method is considered truly extreme, so many doctors are against such experiments.Natural penis enlargement is achieved by increasing blood pressure in the penis.

Doctors warn that this technique is not for beginners.The consequences can be dire

The procedure is carried out strictly in accordance with the established technique.If you deviate from this, the risk of developing serious consequences increases.These include:

• Changing the color of the skin of an organ to a dark tone.
• Head numbness.
• Formation of bruises in the genital region.
• Stagnant blood processes in the tissues of the penis.
• Damage and rupture of capillaries.
• Deterioration of erection.

To avoid such complications when practicing clamping, you should first try gentler techniques, for example, jelqing, Yuli.

Preparing for therapy

Before starting the session, you must consult a specialist.Only a specialist will be able to examine the patient and identify contraindications to the use of vacuum therapy.Sometimes the cause of contraindications can be psychological aspects that can be easily eliminated.

Before using the pump, it must be washed with warm soapy water.It is forbidden to boil or pour boiling water over it.Furthermore, the pump should not be used by more than one person.The pump is quite fragile and must be used with care and not thrown away.The vacuum must be stored in a dark, dry place at a temperature not exceeding 35 degrees.

Algorithm for carrying out the procedure:

• Before placing the pump, it is best to lubricate its base with a special lubricant;
• A very greasy lubricant will render the vacuum pump unusable;
• Place the penis on the base of the pump and press it firmly against the scrotum;
• Before starting the session, it is necessary to lubricate the penis with ointment to increase blood supply;
• Then air must be pumped out of the pump, thereby increasing the pressure in the pump and creating blood flow to the organ;
• Hold the vacuum cleaner with your left hand and use a light bulb with the other to pump out the air inside;
• The bottle hole must be covered and, if there is a valve, close it;
• During the session, it is possible to observe a slight increase in erection and hyperemia of the penis.After half a minute, you need to open the valve and let air into the bottle;
• The procedure takes approximately 20 minutes.During this period, an erection can occur for one minute approximately 20 times.

Contraindications

There are a number of diseases and conditions for which the use of such a device is not recommended.Absolute contraindications include:

1. Diseases of the heart and blood vessels.
2. Thrombosis, atherosclerosis.
3. Varicose veins of the small pelvis.
4. Diseases of an infectious or inflammatory nature.
5. Diseases of the genital region (urological).
6. The presence of tumor formations of various origins.
7. Childhood or adolescence.
8. Mental disorders.
9. Blood clotting disorder.

Also, classes are not held if they bring discomfort or are accompanied by pain.In this case, they will not bring any benefit, they will only harm human health.

There are no other serious contraindications;the device can be used by men of all ages, from 18 to 65 years old.